Stainless Steel Mesh Shielding RF, Electromagnetic (EMFs) & Low Frequency Electrical Fields from Cell Towers - Smart Meters - WiFi -Modems - Cell Phones (W 2.9 ftx L 10ft)

The WM-HEG03 is an extremely fine woven, noncorrosive stainless-steel gauze for the shielding of high-frequency (HF) and low-frequency electric fields (LF). Typical application due to the thin filaments especially as flyscreen. In comparison to WM-HEG10, due to the smaller mesh width, the shielding attenuation is better at high frequencies. Further application in roof areas, at drywall constructions, loosely laid, etc. Processing In case processing as flyscreen, the application is identical to that of a regular flyscreen in commercial tender frames. In case processing the WM-HEG03 under plaster you should work with a finest organic filler. Under the floor covering (laminate, parquet, PVC coating, etc.) the WM-HEG03 is being fixed with the adhesive used for the floor covering. For drywall construction and in roof area the mesh elements can be bolt or stapled together. The rule is: Always overlapp the single elements at least 5 cm. For grounding use the perforated stainless steel tape ELB by screwing it right across the elements into the surface. Grounding: Due to the highly conductive surface this material can be contacted and grounded easy to shield low frequency (LF) electric fields. For professional grounding we recommend our grounding plug EST for self laying application, or our perforated stainless steel tape ELB for application under-plaster or in drywall constructions.

• Used as building material to shield from Cell Towers, WiFi Modems, Smart Meters
• Attenuation: 50 dB, two-layer 68 dB
• Width 2.9 ft, Length 10 ft, Mesh width: 0.012 inch, Wire diameter: 0.0031 inch, Open area: 62 %
• Material thickness: 0.63inch, Color: Gray
• Fire-proof material, A1 according DIN 4102:1994. Surface conductivity: 0.03 Ohm (square resistance)